Firmware: Blaze Audio Wall-S1 controller
Introducing the latest firmware update for the Blaze Audio Wall-S1 controller.
With this update, you can expect to experience upgraded functionality and take advantage of all the new improvements
and enhanced features of your Blaze Audio Wall-S1 controller.
Please note that Blaze Audio Wall-S1 controllers are only compatible with Blaze Audio PowerZone Connect™ amplifiers running firmware version 1.3.0 or later.
To avoid any installation and configuration issues, we recommend updating the firmware installed on your Blaze Audio PowerZone Connect™ amplifier before attempting to install and configure the Blaze Audio Wall-S1 controller
Thank you for choosing Blaze Audio.
Firmware 1.3.0
Features & Improvements:
Info page on long press
Given the user does a long press on button, then the user would be able to select an information page “Info”, to see the following:
- Model name
- IP mode (Static / DHCP)
- IP address/mode
- MAC address of the device
- Firmware version
Network menu updated
Given the network mode is set to “DHCP”, then the following information is not shown:
- IP address
- Mask
- Gateway
Add “Hold button to exit” option in Pin code menu
When prompted for a pin code, the user can then hold down the button and ensure a return to the menu.
“Power up amplifier” if “Settings only” option is selected
If the Wall S1 is configured to “Settings only” pin code option, and the user wants to turn on the amplifier, then the user will be allowed to do so.
Chinese characters
It is now possible to insert Chinese characters in the input or the Zone on the amplifier, which will then be reflected on the Wall S1. The supported Chinese characters can be found on the link below:
English | Simplified Chinese |
|---|---|
Foyer | 门厅 |
Bar | 酒吧 |
Kitchen | 厨房 |
Meeting Room | 会议室 |
Living Room | 客厅 |
Lobby | 大堂 |
Zone | 分区 |
Volume | 音量 |
Mute | 静音 |
Ballroom | 宴会厅 |
Lecture Hall | 报告厅 |
Class Room | 教室 |
Signal Source | 信号源 |
Control | 控制 |
Theater | 剧场 |
PC | 电脑 |
Music | 音乐 |
Toilet | 卫生间 |
Aisle | 走廊 |
Floors | 楼层 |
Input | Chinese symbol |
|---|---|
AUX (Auxiliary) | 音频输入 |
Player | 播放器 |
Turntable (Phono) | 唱片机 |
Bluetooth | 蓝牙 |
Tuner (Radio) | 收音机 |
Tablet | 平板电脑 |
Ethernet | 以太网 |
Microphone | 麦克风 |
Network | 网络 |
TV | 电视 |
Smartphone | 智能手机 |
Computer | 电脑 |
Game Console | 游戏机 |
Zone | Chinese symbol |
|---|---|
Living Room | 客厅 |
Bedroom | 卧室 |
Home Office | 家庭办公室 |
Kitchen | 厨房 |
Dining Room | 餐厅 |
Bathroom | 卫生间 |
Home Theater | 家庭影院 |
Study/Library | 书房/图书馆 |
Outdoor Patio | 户外露台 |
Garden | 花园 |
Garage | 车库 |
Gym/Exercise Room | 健身房 |
Game Room | 游戏室 |
Basement | 地下室 |
Attic | 阁楼 |
Sunroom | 阳光房 |
Dining Area (Kitchen) | 餐饮区（厨房） |
Pool Area | 游泳池 |
Porch | 门廊 |
Firmware 1.2.2
Features & Improvements:
Bugfixes
- Minor fixes
Firmware 1.2.1
Features & Improvements:
Features
- Review MDNS properties
- Check SWID before SW update
- Code Cleanup
- Update Build System – for support Multiple SWID’s
- Support custom boot splash
- Rewrite WebSocket Client handling to Mongoose
- Enable AutoIP – Link Local IP addressing
- Make MDNS instance name the same as Given name in setup
- Improve stability of callbacks
- Handle Amp – MDNS updates
- Optimize Encoder Inputs
Bugfixes
- Encoder overrun
- Device reboot when trying to change ip settings (address)
- Using Zyxel switch causes unexpected reboot on Wall-S1
- Abort FW update might cause crash
- Exception in freertos queue.c cases reboot.
- Draw buffer sometimes NULL
- Update from webpage not working
- Reboot from webpage not working
- Volume returns to 1 when turning knob counter clock wise
after mute
Firmware 1.1.0
Features & Improvements:
Features
- Select Mix from the Blaze Audio Wall-S1 controller
- Disable Mute (KraftWerk API)
- Disable Sources
- When connecting, use standard brightness settings
- Replace WebServer with Mongoose
- User should be able to locate specific Blaze Audio Wall-S1 controllers
- Separate pin code for volume/src
Updates
- Update to ESP IDF 4.3.4
- Unable to find sources in FW 1.3.x
Bugfixes
- Cannot connect to amplifier if Amp-IP has changed
- After “Reset to factory” IP, GATE, and mask are set to 255.255.255.255
Join Our Newsletter
Subscribe now for exclusive updates on new product releases, firmware updates, case studies, and events.