CBL523
Mighty versatility in
a compact package

CBL523 Compact, 2-way Constant Beamwidth Loudspeaker

3 x 2” vertically arrayed HF drivers
2 x 5” custom LF drivers
Powder coated steel grille with a high transmission ratio.
Small size, big impact
Enhancing and harmonizing with the entire Blaze Audio loudspeaker family.
Affordable, capable
Adaptable performance for delay, under-balcony, stage edge-fill and wall-mount applications.
DSP Ready
Professionally tuned for PowerZone™️ digital processing & amplification.
Super wide, tightly controlled
A crossover point at 520Hz continuing all the way up to 20KHz allows for a smooth blend of full range audio from the entire reflective physical space, rendering speech intelligibility holes obsolete.
160° Horizontal Coverage
up to 30° vertical coverage
Uncomplicating Calculations
By fixing the vertical coverage at 15° per unit, the need for splay angle calculation is eliminated, optimizing system configuration, shortening project deployment time, and improving the installation experience.
Results that exceed expectation.
Control where it matters.


Exceptional speaker
design, evolved
Prioritizing R&D and leading the drive towards beautiful sonic possibilities is Hugh Sarvis; a premier product development engineer whose loudspeaker design efforts have resulted in numerous highly acclaimed products dating back to the 1970’s

CBL523-PAS Compact, 2-way Constant Beamwidth Loudspeaker
The ultra-compact and innovatively designed CBL523 is a perfect fit where front-fill, balcony-fill, delay and on-wall distributed audio is needed.
The 8” x 14” enclosure features two 5” low-frequency drivers complimented by a vertical constant directivity array of three 2” high-frequency drivers, delivering 119dB of maximum SPL in a focused 160° (horizontal) x 15° (vertical) pattern.
The CBL523 has versatile mounting options with custom designed hardware, as well as the ability to stack and suspend two units together for increased SPL and an increased 30° vertical pattern.
- (2x) 5” custom LF drivers
- (3x) 2” vertically arrayed HF drivers
- 160° x 15° constant directivity pattern
- Components have been selected solely for their performance.
- 119dB maximum SPL
- Symmetrical and compact trapezoidal design
- Powder coated steel grille with a high transmission ratio
- Tuned with a passive crossover and integration with Blaze Audio amplifiers with custom DSP and FIR filtering
Mounting and Accessories

1 x CBL523-PAS
Flying and Coupling Accessories
Mounting Bracket
Ceiling Mount
Wall Mount
Sold seperatly
Model Specifications
SYSTEM PERFORMANCE | |
Frequency Response (-3dB)1 | 71 Hz – 18 kHz |
Frequency Range (-10 dB)1 | 55 Hz – 18 kHz |
Recommended High-Pass Filter | 48 Hz |
Horizontal Nominal Dispersion (-6 dB) | 160° |
Vertical Nominal Dispersion (-6 dB) | 15° |
Recommended Crossover Frequency | 520 Hz |
Long Term Power Handling (Full Range) | 160 W |
Impedance | 4 ohms |
Pressure Sensitivity (Low Freq @ 1W/ 1m)3 | 101 dB |
Pressure Sensitivity @ 1W/1m (2.83V) | 91 dB |
Max System SPL @ 1m" (2.83v) | 119 dB |
*Frequency response and range measured on-axis with anechoic environment.
PHYSICAL CHARACTERISTICS | |
Enclosure | 12mm Baltic birch plywood, engineered plastics. |
Finish | Two-part spray catalyzed Polyurea coating on plywood. |
Grille | 16-gauge (1.6mm) perforated steel, powder-coated finish, black. |
Environmental | Indoor use only |
Connectors/Bi-Amp | Two (2) parallel-wired NL4 Neutrik® Speakon® connectors. |
Suspension/Mounting | Wall/Ceiling Mount and Suspension Options. Hardware sold separately. |
Dimensions (HxWxD) | 8.08" x 13.78" x 8.75" (205.32 x 350 x 222.29 mm) |
Net Weight | 15lbs / 6.8kg |
Shipping Weight | 18lbs / 8.16kg |
Product Version | CBL523-PAS |