250 W non-networked Class-D amplifier with 2 channels
| Output Power @ 4/8Ω | 2 x 125 W |
| Output Power @ 70/100V* | 2 x 125 W |
| Total System Power | 250 W |
| Power Consumption | 75 W |
| Dimensions | 44.5 x 220 x 262 mm 1.75 x 8.66 x 10.31 in |
| Weight | 1.9 kg | 4.2 lbs |
Maintenance Port Only used by Blaze Audio
DIP Switches See user manual for configuration options
GPIO Connections External control & monitoring
INPUT All channels
OUTPUT All channels
Mains Power IEC 90-268 Vac input
PowerZone™ is a series of non-networked Class-D installation amplifiers engineered for professionals who demand affordable, reliable, high-performance audio power.
Key features include flexible configuration options that allow each output channel to be independently set to drive either Lo-Z or Hi-Z loads, enabling you to tailor your system to drive both types of loudspeakers from a single unit. Additionally, the PowerZone™ series’ power-sharing technology (exclusive to the 252 and 504 models) intelligently distributes the total available power across channels, ensuring optimal performance and reliability.
With full rack support and adaptable desk and wall mount brackets, the PowerZone™ series offers unparalleled installation versatility in a compact form factor that seamlessly fits into spaces where other amplifiers may fall short.
Like all PowerZone products from Blaze Audio, these amplifiers come with a 5- year warranty.
| Total System Power | 250 W |
|---|---|
| Output Power @ 4/8Ω | 2 x 125 W |
| Output Power @ 70/100V* | 2 x 125 W |
| Powershare (up to) Across all channels** | 1 x 250 W |
| Power Consumption | 75 W |
| Dimensions | 44.5 x 220 x 262 mm |
| Weight | 1.9 kg (4.2 lbs) |
| Output Circuitry | UMAC™ Class D – full bandwidth PWM modulator with ultra-low distortion |
| Output Voltage | 45Vrms (S.E) – 70/100V (Hi-Z) |
| Signal To Noise-Ratio | > 100 dB (A-weighted, 20 Hz – 20 kHz, 8 Ω load) |
| THD+N (typical) | < 0.05 % (20 Hz – 20 kHz, 8 Ω load, 3 dB below rated power) |
| Frequency Response | 20 Hz – 20 kHz (+0/-0.25 dB (8 Ω load, 3 dB below rated power) |
| Protection Circuits | Short circuit protection, DC protection, under voltage protection, temperature protection, overload protection |
| Power Supply | UREC™ universal mains switch mode power supply with Power Factor Correction (PFC) |
| Operating Voltage/Frequency. | Universal Mains, 100-240V, 50-60Hz |
| Standby Consumption | < 0.5 W (Energy Star & ErP 1275/2008/EC compliant) |
| Power Ratings | 1% THD @ 120VAC and 230VAC |
Yes, the amplifiers will remember the settings of maximum volume when dipswitch number 8 is placed in the upper position. This is most helpful if 10K ohm potentiometers are used or if the amplifier is used in a larger installation controlled from a DSP.
Yes, the amplifier can be triggered to go into standby using the GPIO contact on the back of the amplifier. A normally open (NO) or normally closed (NC) contact can be used.
No, each output can be driven in either Low-Z or High-Z. This makes these amplifiers very flexible.
The maintenance USB port can be used to update the built-in DSP in the amplifiers. Look at our website to find the latest firmware (It is normally not necessary to update the firmware).
No, only by linking the inputs. The PowerZone amplifiers do not have S/PDIF in and out, as the PowerZone Connect series.
Subscribe now for exclusive updates on new product releases, firmware updates, case studies, and events.
