CCA10
Unmatched coverage
and control

CCA10 Constant Curvature Array
Symmetrical Clarity
Consistent full-range sonic performance with near-zero listening interference.
Unlocked Value
Class leading coverage, improved FOV, fewer enclosures required.
DSP Ready
Professionally tuned for PowerZone™️ digital processing & amplification.
Super wide, tightly controlled
A crossover point at 420Hz continuing all the way up to 20KHz allows for a smooth blend of full range audio from the entire reflective physical space, rendering speech intelligibility holes obsolete.
160° Horizontal Coverage
up to 240° vertical coverage
Uncomplicating Calculations
By fixing the vertical coverage at 20° per unit, the need for splay angle calculation is eliminated, optimizing system configuration, shortening project deployment time, and improving the installation experience.
Results that exceed expectation.
Control where it matters.

*

*R&D of this loudspeaker has been thoroughly measured and tested with a Klippel Analyzer System certified by Klippel GmbH.
Exceptional speaker
design, evolved
Prioritizing R&D and leading the drive towards beautiful sonic possibilities is Hugh Sarvis; a premier product development engineer whose loudspeaker design efforts have resulted in numerous highly acclaimed products dating back to the 1970’s

CCA10 Constant Curvature Array, Scalable 20° Vertical
The CCA10 is a compact arrayable point source loudspeaker, designed for medium-sized venues to large distributed systems that need a flexible, scalable speaker solution.
Mounted horizontally with tight acoustic centers to minimize comb filtering, each CCA10 enclosure provides a fixed 20° vertical coverage and can be flown with additional enclosures in vertical arrays.
Featuring a coaxial compression driver that uses separate midrange and high-frequency polymer ring- shaped diaphragms, the compression driver delivers an extremely wide response from 420 Hz – 18,000 Hz.
Two 10” high-excursion ultra-low distortion drivers offer reduced power compression, providing efficient and accurate bass reproduction down
to 52 Hz.
- 3-way Arrayable Point Source, designed for Bi-Amping
- Constant Curvature waveguide for unprecedented array coherence
- Precision 160 Degree Symmetrical Horizontal pattern control
- Variable vertical coverage in 20° increments (one enclosure 20° and max 12 enclosures)
- Dual 10” ultra low distortion, high excursion drivers
- System range 52 Hz – 18 kHz
- Exceptionally high SPL
- Rugged Polyurea coating for extreme durability
- System integration with BLAZE amplifiers
Whats in the box

1 x CCA10i-BA loudspeaker
2 x CCA10i-BA Rigging Plates
8 x M10x30 hex head bolts
Sold seperatly
Model Specifications
SYSTEM PERFORMANCE | |
Frequency Response (-3dB)1 | 52 Hz - 18 kHz |
Frequency Range (-10 dB)1 | 45 Hz - 18 kHz |
Recommended High-Pass Filter | 48 Hz - w/ minimum 24 dB / Butterworth Filter |
Horizontal Nominal Dispersion (-6 dB) | 160° |
Vertical Nominal Dispersion (-6 dB) | 20° |
Recommended Crossover Frequency | 420 Hz (acoustic, active, external DSP) |
Long Term Power Handling (Low Freq.)2 | 600 W (2400 W peak) |
Long Term Power Handling (High Freq.) 2 | 110 W (440 W peak) |
Low Frequency Impedance | 4 ohms |
High Frequency Impedance | 8 ohms |
Pressure Sensitivity (Low Freq @ 1W/ 1m)3 | 101 dB |
Pressure Sensitivity (High Freq. @ 1W/1m)3 | 111.4 dB |
Max System SPL (@ 1W/1m) | 131 dB SPL (140 dB SPL peak) |
1. Frequency response and range measured on-axis with recommended active EQ in an anechoic environment. 2. Power handling tested using pink noise filtered to meet IEC 268-5, 6 dB crest factor, 100 hours, with recommended EQ. 3. Sensitivity measured in free field (no boundary-loading gain) with recommended active EQ, referenced to 1W/1m. 4. Maximum SPL calculated from sensitivity and power handling specifications, exclusive of power compression (100Hz-10KHz).
PHYSICAL CHARACTERISTICS | |
Enclosure | Baltic birch plywood, engineered plastics, and aluminum frame. |
Finish | Two-part spray catalyzed Polyurea coating on plywood |
Grille | 14-gauge (2mm) perforated steel, powder- coated finish, black |
Environmental | Indoor use only |
Connectors/Bi-Amp | Two (2) parallel-wired NL4 Neutrik® Speakon® connectors |
Suspension/Mounting | Install side rigging; optional array frame accessories |
Dimensions (HxWxD) | 13.23” x 32.33” x 18.25” (336.14 x 821.21 x 463.68mm) |
Net Weight | 83lbs / 37.65kg |
Shipping Weight | 88lbs / 39.91kg |
Product Version | CCA10 |